Extreme Green Junior Model

"Extreme Green Junior Model Personal Putting Green The Extreme Green Junior is designed for smaller areas like office, trade shows, special events, parties, etc. This model allows for a 6- 1/2 foot putt with left or right breaks It is our most economical adjustable practice green of the Executive line. Makes a great gift for any member of your family or purchase for your next corporate event.  Features  • 2.5' x 8' Extreme bed support  • 16 Segments  • 2 cups with flags  • Turf  How it works The Extreme Green is made up of patented modular segments that are adjustable by sliding the side support wedges in or out to change the slope. The green can be set up on any level surface and are designed and constructed for years of maintenance free use. The Extreme Green is assembled by interlocking individual segments together. To create the desired length of your green just link the right amount of segments together. A 20 foot green will need 36 segments each segment being 6.6 inches wide. If one hole on either side is desired then two segments with holes are needed. Place the holed segments in the 5th segment on each end. When all the segments are in place then the turf can be rolled out on top. First place the cups into the holes then roll the turf over the bed. Then mark the top of the cups at three points with a black felt pen which will leave an imprint on the back of the turf. Last, place the cup on the imprint on the back of the turf and cut around the cut with a razor knife to finish.  Easy Set up and adjustment The Extreme Green is made up of patented modular segments that are adjustable by sliding the side support wedges in or out to change the slope. The green can be set up on any level surface and are designed and constructed for years of maintenance free use. The Extreme Green is assembled by interlocking individual segments together. To create the desired length of your green just link the right amount of segments together. A 20 foot green will need 36 segments each segment being 6.6 inches wide. If one hole on either side is desired then two segments with holes are needed. Place the holed segments in the 5th segment on each end. When all the segments are in place then the turf can be rolled out on top. First place the cups into the holes then roll the turf over the bed. Then mark the top of the cups at three points with a black felt pen which will leave an imprint on the back of the turf. Last, place the cup on the imprint on the back of the turf and cut around the cut with a razor knife to finish.               Standard Features  • Units link together to create an adjustable multi-slope putting green  • Commercially durable all-weather construction  • Anodized aluminum and high impact plastic components  • Suitable for residential or commercial applications If you have any questions about this product or would like to order by phone, please call us Toll Free at 888-733-8383. We look forward to hearing from you!"