The Heavy Putter is a radical step in putter design. It is as different from conventional putters as a metal driver is from persimmon.

When you putt with the Heavy Putter, you will Feel the Difference.

Click Here to see all 6 Heavy Putter styles.

Heavy Putter Technology

Heavier Mass Putter Heads | Patented Heavy Putter heads weigh between 450 and 550 grams. Conventional putter heads weigh roughly 330 to 350 grams. The heavier mass of the putter head disengages a golfer's small wrist muscles and engages larger shoulder muscles. This promotes a pendulum stroke and leads to a more consistent swing path. The heavier head mass also produces a softer feel by dampening vibration at impact.

Weight Management System (WMS) | A low balance point exacerbates the putter head's release causing wrist breakdown through impact, making the putter head uncontrollable. Heavy Putter have a WMS insert weighing 250 grams located inside the upper shaft. (Patented) The WMS shifts the putter's balance point higher up the shaft.

High Balance Point | Heavy Putters have a balance point that is 75% higher than conventional putters. (Patent Pending) The higher balance point allows the golfer to manage the heavier mass head and consequently benefit from its greater stability. Raising the balance point of the putter brings the center of mass of the putter closer to the center of mass of the golfer. This increases the stability of the putter throughout the stroke. The higher balance point also creates a tighter end over end roll of the golf ball. Locating the correct balance point for each golfer ensures a proper and consistent release through impact.

Extreme Heel-Toe Weighting | Heavy Putter head designs have incorporated extreme heel-toe weighting which creates a high moment of inertia. A high moment of inertia means that the putter head will resist twisting on off center hits and consequently produce straighter putts that reach the hole.

Conclusion | The results for the golfer are improved path, greater stability and a consistent release through impact which results in a superior roll of the golf ball leading to fewer putts per round and improved scores.

Optional Weight Kit
The Heavy Putter Optional Weight Kit includes 2 Aluminum 10 gram weights, & 2 Copper Tungsten 35 gram weights. The putter comes installed with (2) 22.5 gram weights. With the optional weight kit you can customize your Heavy Putter to your desired weight and putting stroke.

Heavy Putter Testing
* The Heavy Putter has been PGA Tour tested and tour proven. The response from the PGA Tour has been overwhelmingly positive.
* Early prototypes of the Heavy Putter™ were used in PGA and College tournaments as well as by top amateur golfers.
* Early testing done by Bentley Sports revealed the prominent differential of the Heavy Putter™ over traditional putters.
* The field testing was done by golfers of all abilities and handicaps.
* Heavy Putter™ is currently using the Science in Motion Inc. 'Super SAM' System to analytically show the difference between conventional putters and the Heavy Putter™ technology.
* The results will be made available on this website once the independent testing is completed.

Heavy Putter Advantage
* The heavier mass engages large muscles and disengages small muscles.
* Using the large muscles of the chest, shoulders, and back promotes a pendulum stroke with less deviation in path.
* The higher balance point encourages lighter grip pressure which creates a smoother stroke, more solid contact and improves distance control.
* The higher balance point produces a consistent end over end roll immediately after impact.
* The higher balance point leads to a more consistent putter release through impact and a more constant acceleration throughout the stroke.
* A heavier mass increases head stability throughout the impact zone improving putting accuracy.
* The extreme perimeter weighting and the face balanced head design create a high moment of inertia, thus improving distance control and accuracy for off-center hits.
* The Heavy Putter's personal fitting system optimizes the putter's performance for the individual golfer.
* Heavy Putter™ lengths are adjusted to match the golfer's putting posture.
* Fitting the proper length and optimizing the balance point of the putter is achievable with the Interchangeable Tip Weights and the WMS.

Head Design Principles
Head Composition | Heavy Putters™ are milled from a billet of 303 Stainless Steel. 303 Stainless Steel is a very soft metal which creates a soft putting feel.

Perimeter Weighted | All Heavy Putter™ heads are perimeter weighted which produces a high Moment of Inertia. High Moment of Inertia creates a high resistance to twisting, producing straighter, and more accurate putts that reach the hole.

Face Balanced | Heavy Putter™ heads are face balanced. Combining light grip pressure with face balancing allows the putter head to naturally find its center (square its face) at the moment of impact. Face balancing also encourages a pure pendulum stroke with a more consistent swing path.

CNC Milling Process| Heavy Putter™ heads are Computer Numerically Controlled (CNC) milled from a solid billet of 303 Stainless Steel. The milling process creates a tight dimensional and weight tolerance and eliminates possible voids found in casting.

Diamond Cut Face | The double CNC milling process produces a diamond cut face pattern which optimizes the golf ball's roll and also imparts a soft feel directly following impact.

Surround Sight | Heavy Putter's unique "Surround Sight" semi-circle alignment aid, located directly behind the face, promotes consistent on center hits. This results in a tighter deviation of impact on the sweet spot versus a traditional putter with a line or dot alignment mark.

Parallel and Perpendicular Lines | The Heavy Putter™ head design incorporates parallel and perpendicular lines to promote the golfer's ability to set up perfectly to the intended target line.

Other Putter Components
Loft | Heavy Putter has determined that 3.5 degrees of loft produces the optimal roll conditions for the Heavy Putter™ technology.

Lie | The lie of the Heavy Putter is 72 degrees. The 12 inch sole radius is designed to accommodate golfers with various lie angle requirements. Because we fit the length of the putter to the golfer's posture, the lie angle of the Heavy Putter™ rarely has to be adjusted.

Hosels | Heavy Putters currently incorporate three distinct hosel configurations all of which uphold the face balanced design of the putter head. The center shafted design mounts the shaft directly into the center of the putter's top line. The heel mounted plumber's neck 6061 Aluminum hosel is anodized in Heavy Putter™ green and provides a full shaft offset. The double bend heel mounted shaft is available in half to full shaft offset.

Grips | Heavy Putter grips are custom made by Eaton Golf Pride in the Heavy Putter™ green color. The grip style is similar to the Velvet Pro model which is a textured pistol grip with a flat surface on the top.

Shafts | Heavy Putter shafts are made and custom bent to Heavy Putter™ specifications by True Temper Sports.

Headcovers | Each Heavy Putter model has a custom fit black headcover with the custom embroidered Heavy Putter™ logo and branding.